Sitting & Lying Hyperbaric Chamber – Navy Blue, Portable Soft Shell

√ Navy is the finish to specify when the cabin moves between sites and has to look presentable in each one.

√ The frame comes out and the shell folds down, so the unit travels in a vehicle between locations instead of needing its own room at each.

√ For a room where the cabin stays put, the standard HC050 listing covers the same three positions.

√ Emergency valve drops the cabin pressure on demand, so a guest can come out mid-session instead of waiting for the cycle to finish.

√ Shell panels are joined by high-frequency welding rather than adhesive, so there is no glue line to soften, crack, or give off odor as the cabin ages.

√ Nine-stage air filtration sits on the incoming air supply.

√ One person assembles and runs it: the manual covers frame, hose, and gauge, and a no-load pressure test confirms the seal before the first session.

√ No one needs to stay inside during a session. Once the zip is closed and the concentrator is running, one attendant can look after several cabins.

- Mobile operators running events and pop-up wellness spaces.
- Sports teams and touring physio setups.
- Hotels that move the unit between suites by season.
- Studios with more than one location and one cabin between them.
- Facilities that store equipment between bookings.

What we customize

• Cover color and pattern, including Pantone matching
• Your logo on the cabin, carry bag, and control panel
• Voltage, plug type, and certification marking for your destination market
• User manual and packaging in your language
• Retail carton and master carton artwork
• Accessory bundle (mask vs cannula, spare parts kit, cooling option)

How it works

1. Send your requirement and target market. We confirm feasibility and MOQ within 1 working day.
2. Approve a sample or digital proof. Sample lead time: 31 days.
3. Production lead time: 15–31 days after deposit, 31–45 days for custom builds.

Minimum order: 20 units per model for logo and color customization; 20 units for full packaging customization.

What is a sitting and lying hyperbaric chamber?
A sitting and lying hyperbaric chamber is a convertible soft-shell chamber that supports more than one body position. Inside the cabin, you can sit upright, recline, or lie down.

How is a sitting and lying chamber different from a sitting chamber?
A sitting chamber is designed for an upright posture only. A sitting and lying chamber has a longer cabin (2000 × 650 × 1200 mm), so you can also recline or lie flat.

Can I change position inside the chamber?
Yes. You can sit upright, half-sit, or lie down, and change position during a session.

Is the chamber for one person?
Yes. The HC050 is a single-user chamber. Do not enter with another person or a child.

What pressure do HEAOCEAN sitting and lying chambers use?
HEAOCEAN's mild hyperbaric chambers operate at a standard pressure of 1.3 ATA. 1.5 ATA is available as a custom option.

How long is a typical session?
The recommended session is 60 to 90 minutes. Always wait until the gauge reads 1 ATA before you open the zipper.

Can I use the chamber at home?
Yes. The portable soft-shell design is made for home use. Remove the internal metal frame to fold the chamber down for storage and transport.

Can children or infants use the chamber?
No. These chambers are intended for adult use only. They are not designed, tested, or certified for use by children. Anyone under 18 should not enter the chamber.

Can I use the chamber if I feel anxious in small spaces?
Use caution. The chamber is an enclosed space, so people who are uneasy in enclosed spaces, including those with claustrophobia, should consult a physician first. If you feel uncomfortable at any point, stop the session by following the depressurization steps in the manual.

Is a sitting and lying hyperbaric chamber a medical device?
No. HEAOCEAN chambers are wellness and recovery products for general relaxation and personal wellness use. They are not intended to diagnose, treat, cure, or prevent any disease, so consult a physician first if you have a health condition.

Does HEAOCEAN offer OEM and ODM services?
Yes. HEAOCEAN supports OEM and ODM orders for international distributors and brand partners. Availability depends on technical feasibility, order quantity, and confirmed specifications.

How do I request a quotation?
Send us the model, quantity, destination country, voltage, pressure requirement, intended application, branding needs, and delivery terms. With these details, we can prepare a more accurate configuration and quote.