Equip your gym, sports club, or recovery studio with a 1.3 ATA mild hyperbaric chamber. Offer athletes and members a private space for rest after training, with model selection, room-planning guidance, and optional OEM branding direct from the factory.
A gym recovery room can sit alongside personal training and membership services. Sports clubs can plan private rest sessions around team schedules, while independent recovery studios can offer a booked wellness session alongside their existing services.
A private recovery room gives you something to sell as a package or membership upgrade rather than a single-use add-on.
A chamber occupies roughly the space of a treatment table — far less than a second training zone.
Single-operator design means one staff member can run sessions across a full day without specialist training.
Most local gyms offer the same equipment. A recovery facility is a visible, photographable reason to choose you.
A quiet rest option alongside training gives members one more reason to stay engaged with your facility.
Recovery sessions can be offered to personal-training clients as an add-on service.
A mild hyperbaric chamber is a sealed enclosure that raises the surrounding air pressure above normal atmospheric pressure. The standard configuration is 1.3 ATA. Users sit or lie inside during a session, following the operating instructions. This is wellness equipment for rest and relaxation, not a medical treatment or a promise of improved athletic performance.
Safety, construction, and oxygen-supply details that matter when a chamber is used by different members every day.
Dual-sided zipper design supports reliable sealing and easier entry and exit.
Multiple relief valves release pressure automatically if it exceeds the preset limit.
A digital display lets you check chamber pressure at any time during a session.
A clear window gives a view of the chamber interior.
High-frequency heat sealing joins the TPU composite without adhesive bonding.
An oil-free compressor and molecular sieve oxygen unit, with independently replaceable components.
The right model depends on how much floor space you have, how many sessions you want to run per day, and how premium you want the experience to feel.
| Facility type | Recommended model | Why |
|---|---|---|
| Boutique studio, small gym | Sitting Portable Soft Shell | Smallest footprint and lowest entry cost; easy to relocate as you grow |
| Full-service gym, recovery studio | Sitting & Lying 1.3 ATA | Dual posture lets you serve both casual and serious users from one unit |
| Premium recovery lounge | Lying Portable Soft Shell | Full-length comfort for a longer, more luxurious session experience |
| Flagship facility, sports club | Hard Shell | Durable structure and premium presentation for high-traffic, high-visibility use |
Recovery rooms are often reached through gym corridors and service lifts. These reference figures show carton count, weight, and the longest carton for each core format.
| Configuration | Chamber size | Cartons | Net / gross weight | Longest carton | Carton volume |
|---|---|---|---|---|---|
| Sitting chamber · HS050 | 1600 × 650 × 1200 mm 63.0 × 25.6 × 47.2 in |
6 | 66.7 / 74.8 kg | 120 × 9 × 29 cm | ≈ 0.51 m³ |
| sitting and lying chamber · HC050 | 2000 × 650 × 1200 mm 78.7 × 25.6 × 47.2 in |
5 | 62.2 / 68.1 kg | 126 × 4 × 48 cm | ≈ 0.34 m³ |
| sitting and lying chamber · HC050 with optional chairs | 2000 × 650 × 1200 mm 78.7 × 25.6 × 47.2 in |
7 | 81.5 / 92.1 kg | 65 × 31 × 127 cm | ≈ 0.77 m³ |
| Lying chamber · HL050 (M) | Ø 750 × L 2000 mm Ø 29.5 × L 78.7 in |
4 | 50.4 / 55.2 kg | 75 × 75 × 42 cm | ≈ 0.52 m³ |
How to read this table: figures come from HEAOCEAN product packing sheets and cover the cartons listed for each configuration (chamber cover, oxygen concentrator, refrigerated air dryer, internal frame, plus base plate and chair where applicable). Carton volume is calculated from the listed carton sizes. The HC050 is shown with and without its optional folding chair and armchair. Hard-shell packing data is provided separately on request. Final packing, weights, and accessories are confirmed in the written quotation. Standard configurations operate at about 1.3 ATA; 1.5 ATA is built to order.
Cover customization available. Match the chamber cover to your club or studio branding. The collection pages below show different colors, cover finishes, and customization examples built on the same core styles. Final customization scope is confirmed in the written quotation.
View sitting chamber options →View sitting and lying chamber options →View lying chamber options →
Full exterior customization is available on every model. Designs 01 to 06 below are examples only; colors, logos, and graphic styles can be tailored to your gym, club, or recovery-studio branding. The final customization scope is confirmed in the written quotation.
When adding a hyperbaric chamber to a gym or sports recovery room, check the chamber footprint, equipment placement, access route, electrical requirements, and staff workflow before ordering.
Allow room for the chamber plus comfortable clearance for entry, exit, and staff assistance on at least one long side.
A standard commercial circuit for the integrated oxygen and cooling unit. We confirm the exact requirement for your chosen model.
Normal room ventilation is sufficient; the room should be comfortable for a resting occupant for about an hour.
One person can operate the chamber. Plan a simple booking and cleaning routine between sessions.
The planning zone adds a 350 mm (13.8 in) walkway along the open side and at the foot end, a 420 mm (16.5 in) bay for the oxygen concentrator and air dryer (stacked, 420 × 250 mm / 16.5 × 9.8 in each), and a 100 mm (3.9 in) heat-dissipation gap at the wall end. Keep a wall power outlet behind the equipment, not a door.
| Model | Chamber footprint | Installed footprint (chamber + equipment + heat gap) | Planning zone area (+350 mm / 13.8 in walkway) | Planning zone size (L × W) |
|---|---|---|---|---|
| Sitting HS050 | 1.04 m² / 11.2 sq ft | 1.38 m² / 14.8 sq ft | 2.47 m² / 26.6 sq ft | 2470 × 1000 mm 8 ft 1.2 in × 3 ft 3.4 in |
| sitting & Lying HC050 | 1.30 m² / 14.0 sq ft | 1.64 m² / 17.6 sq ft | 2.87 m² / 30.9 sq ft | 2870 × 1000 mm 9 ft 5.0 in × 3 ft 3.4 in |
| Lying HL050 (M) | 1.50 m² / 16.1 sq ft | 1.89 m² / 20.3 sq ft | 3.16 m² / 34.0 sq ft | 2870 × 1100 mm 9 ft 5.0 in × 3 ft 7.3 in |
| Lying HL050 (L) | 1.80 m² / 19.4 sq ft | 2.22 m² / 23.9 sq ft | 3.59 m² / 38.6 sq ft | 3120 × 1150 mm 10 ft 2.8 in × 3 ft 9.3 in |
A short walkthrough of a finished recovery room helps operators plan floor space, equipment position, booking flow, and cleaning between sessions.
These chambers are supplied as wellness equipment with single-person operation. Staff should be trained in the operating instructions, cleaning, and emergency procedures. Check the applicable operating and licensing requirements in your market; wellness positioning does not replace local rules. We provide operating guidance.
Plan the schedule using the session duration specified for your configuration, plus time for entry, exit, cleaning, and checks between users. Confirm the operating limits and maintenance routine before setting a daily booking capacity.
Yes. Logo, exterior colors, and graphics can be tailored to your gym, sports club, or recovery studio. See our OEM and private label page for the confirmed options and quotation process.
Our factory operates under a quality management system certified to ISO 13485:2016. That certification applies to the management system, not to the chamber as a medical device. These chambers are supplied as wellness and recovery products, and we do not make medical treatment claims.
The price depends on the chamber format, configuration, customization, and delivery destination. Request a gym recovery room quotation with your available space and expected quantity so we can recommend a configuration and confirm the total scope.
The oxygen system has modular components that can be replaced independently. Ask us to confirm the parts included, replacement process, and warranty terms for your configuration in the written quotation.
The planning zones shown on this page range from 2.47 m² / 26.6 sq ft for Sitting HS050 to 3.59 m² / 38.6 sq ft for Lying HL050 (L). These reference zones include the equipment bay, heat-dissipation gap, and the walkway shown in the drawings. Check your room access and local clearance requirements as well.
Choose a quieter area away from busy training-floor traffic. Use the room-planning drawings to check entry and exit access, equipment position, wall power, heat-dissipation space, and the cleaning route. Confirm the electrical and ventilation requirements for the chosen configuration before installation.
This page is for gyms, sports clubs, and studios buying wellness equipment for rest after training. The chamber is not supplied as a medical device. We do not promise faster muscle recovery, injury treatment, or improved sports performance.
Tell us your facility type, floor space and expected daily sessions. We will recommend the model and configuration that fits your layout.
Tell us your facility type, floor space, and how many sessions you plan to run. We will recommend a model and send a quotation after review.
A few details about your facility help us recommend the right configuration.